Display Description - Raleigh PEDELEC IMPULSE EVO Notice Originale

Display Description
Battery does not "wake
up" from Sleep mode.
11.3 Charger
Charger type 1
Description Cause
Charger gets hotter than Ambient temperature too
85˚C. high, direct sunlight
Damaged charger
Charger type 2
Display Description Cause
The red There is a charging fault.
LED flashes
continuously.
EN-102 Original User Guide | Pedelec Impulse Evo / Impulse Evo Next Version 4
Cause
a) B attery is flat.
b) Damaged battery.
Remedy
1. Unplug the charger from the mains immediately and let it cool down.
Always stay with the charger and the battery when it is in use.
2.
Continue the charging process when the charger has cooled down.
Permitted ambient temperature range during charging: 0 bis +40 ˚C.
3. If the problem reoccurs, please ask your dealer; the charger may have to be replaced.
Please ask your dealer; the charger may have to be replaced.
Remedy
Unplug the charger from the mains immediately. If the problem reoccurs, a new battery charger is required.
Remedy
a) Briefly charge the battery.
a) I f the battery still does not respond or the LEDs flash in an unusual way, the battery is
damaged and must be removed from the charger.
b) Damaged batteries must not be charged or used for any other purpose. Contact your
cycle dealer. The battery may have to be replaced.