10.
mAinTenAnce And
TRoubleshooTinG
10.1.
safety instructions
danger
Risk of injury due to high pressure in the installation
•
Stop the circulation of fluid and depressurize the pipes before
loosening the process connections.
Risk of injury due to electrical voltage
•
Before starting work, make sure that you switch off the supply
voltage and secure it to prevent restarting.
•
Do not unscrew the cover of a powered device.
•
Observe all applicable accident protection and safety guidelines
for electrical equipment.
Risk of injury due to high fluid temperatures.
•
Use safety gloves to handle the device.
•
Stop the circulation of fluid and drain the pipes before loosening
the process connections.
•
Keep all easily flammable material and fluid away from the device.
Risk of injury due to the nature of the fluid.
•
Respect the regulations on accident prevention and safety relat-
ing to the use of aggressive fluids.
36
english
Type 8400
Maintenanceandtroubleshooting
Warning
Risk of injury due to non-conforming maintenance.
•
Maintenance must only be carried out by qualified and skilled
staff with the appropriate tools.
•
Ensure that the restart of the installation is controlled after any
interventions.
10.2.
maintenance and cleaning
noTe
the device may be damaged by the cleaning product.
•
Clean the device with a cloth slightly dampened with water or a
product compatible with the materials from which it is made.
Please feel free to contact your Bürkert supplier for any additional
information.