Description Of The Display And The Browse Keys - Burkert 8400 Manuel Utilisateur

Adjustmentandfunctionalities
Mode Functions
Simulation • To test the configuration made in
Calibration mode with input of a
theoretical value.
• To calibrate the expansion board
in a transmitter version.
9.5. description of the display and
the browse keys
The housing of the 8400 comprises:
- a display which gives the temperature measured, the configura-
tion and a bar graph (see Fig. 22) ;
- a red LED which indicates the commutation status of the tran-
sistor or relay output (see Fig. 22) ;
- three browse keys (see Fig. 22 and table below).
Display
Bar graph
Back key
Fig. 22: Description of the display
Type 8400
Accessing the
other modes
• Read
Red LED
Confirm key
Next key
Browse keys Functions
Back key • To change the numerical value (0...9).
• To go back to the previous function.
Next key • To select the character.
• To go to the next function.
Confirm key
• To confirm the selection of a function.
• To confirm the input parameters.
english
25