Electrical Connections - Burkert 8400 Manuel Utilisateur

Table 3: Electrical data specific to the UL-approved transmitter
Characteristics of the power
source (not supplied)
Drain current
Installation class
Relay output
6.3.4.

electrical connections

Version connection type
Detector with M12 female 5-pin connector (not provided).
transistor
output
Detector with EN 175301-803 (type 2508 provided)
relay output M12, 5-pin female connectors (not provided)
Transmitter EN 175301-803 (type 2508 provided)
8-pin female connectors (not provided)
1)
EaseOn with 2511 connector on request
12
• Limited power source (in
accordance with § 9.3 of the
UL 61010-1 standard)
• or class 2 type power source
(according to the 1310/1585
and 60950-1 standards)
30-50 mA
I
maximum 30 VAC and 42 V
peak or 60 VDC, 2.5 A max.
and
1)
and M12,
1)
english
Type 8400
Technicaldata
type of connector cable type
M12 with order code •
917116
•
•
2508 with order code •
438811
•
•
shielded
3 to 6.5 mm in diameter
with wires with a max. cross section
of 0.75 mm
2
shielded
6 to 7 mm in diameter
with wires with a cross section of
between 0.14 and 0.5 mm
2