Final Assembly; Reverse Switch Operation - Emerson VOLTA CF590BQ00 Mode D'emploi

8.1
Lift the ceiling cover up to the threaded studs and turn until
studs protrude through the holes in the ceiling cover
(Figure 33).
Secure the ceiling cover in place by sliding lockwashers
over the threaded studs and installing the two knurled
knobs (supplied in parts bag). (Figure 33).
Tighten the knurled knobs securely until the ceiling cover
fits snugly against the ceiling and the hole in the ceiling
cover is clear of the downrod.
WARNING
!
To avoid possible fire or shock, make sure that the electrical
wires are completely inside the outlet box and not pinched
between the ceiling cover and the ceiling.
9.1
Restore electrical power to the outlet box by turning the
electricity on at the main fuse box.
All fans are shipped from the factory with the reversing
switch positioned "left" to circulate air downward.
If airflow is desired in opposite direction, turn your fan OFF
and wait for the blades to stop turning, then slide the
reversing switch to the "right" position, and turn fan on
again (Figure 34).
The fan blades will turn in the opposite direction and
reverse the airflow.
Reverse Switch Information
Summer Counter-Clockwise
Season Rotation Direction
Winter Clockwise

8. Final Assembly

9. Reverse Switch Operation

Left
Switch Position
Right
Figure 33
Figure 34
19
CEILING
COVER
THREADED
STUDS (2)
LOCKWASHERS (2)
KNURLED
KNOBS (2)
REVERSING
SWITCH
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF590