Ceiling Fan Assembly - Emerson VOLTA CF590BQ00 Mode D'emploi

3.1
Remove fan motor assembly from styrofoam. Remove
cardboard shipping spacer and plastic bag.
Place fan motor assembly on styrofoam with the motor hub
positioned up (Figure 1).
3.2
Loosely attach one ceiling fan blade assembly to the motor
hub of the fan motor assembly using three
1/4-20 x 9/16" Pan Head Screws with Lockwashers
(supplied in the parts bag) (Figure 2).
Repeat this procedure for the other two blade assemblies.
Securely tighten the nine 1/4-20 x 9/16" Pan Head Screws
with Lockwashers to the motor hub at this time.
WARNING
!
To reduce the risk of personal injury, do not bend the
blade assemblies when installing, balancing the blades
or cleaning the fan. Do not insert foreign objects in
between rotating fan blades.
3.3
Remove one of the three 6-32 x 3/8" Truss Head
Screws with Lockwashers in the motor hub of the fan
motor assembly and loosen the remaining two
6-32 x 3/8" Truss Head Screws with Lockwashers
positioned in the key hole slots (Figure 3). Retain the
screw for future use.
Position the Light Kit Adapter key hole slots onto the two
loosened screws.
Rotate the Light Kit Adapter clockwise to engage the two
screws.
Reinstall the previously removed screw.
Retighten the three screws to securely assemble the Light
Kit Adapter to the motor hub.
Spare 6-32 x 3/8" Truss Head Screws with Lockwasher in
the parts bag.

3. Ceiling Fan Assembly

5
Figure 1
FAN MOTOR
ASSEMBLY
Figure 2
ROTATE CLOCKWISE
Figure 3
Please contact 1-800-654-3545 for further assistance
PLASTIC BAG
MOTOR HUB
CARDBOARD
SHIPPING
SPACER
FAN MOTOR
ASSEMBLY
1/4-20 x 9/16" PAN HEAD
SCREW WITH LOCKWASHER
(3 per blade assembly)
FAN BLADE ASSEMBLY
MOTOR HUB
6-32 x 3/8" TRUSS
HEAD SCREW
WITH
LOCKWASHER
LIGHT KIT
ADAPTER
MOTOR HUB
emersonfans.com
ETL Model No.: CF590