Emerson VOLTA CF590BQ00 Mode D'emploi page 10

4. How to Hang Your Ceiling Fan
4.2
Carefully lift the partially assembled ceiling fan and seat
the hanger ball/downrod assembly on the hanger
bracket that was just attached to the outlet box
(Figure 15).
Be sure the groove in the ball is engaged with the anti-
rotation tab on the hanger bracket (Figure 15).
NOTE: Be very careful not to bend the blade
assemblies while hanging the partially assembled
ceiling fan.
WARNING
!
Failure to seat tab in groove could cause damage to
electrical wires and possible shock or fire hazard.
WARNING
!
To avoid possible fire or shock, do not pinch wires
between the hanger ball/downrod assembly and hanger
bracket.
NOTE: CEILING COVER, SUPPL Y WIRES AND FAN WIRES
OMITTED FOR CLARITY.
Figure 15
10
(Continued)
OUTLET
BOX
HANGER
BRACKET
HANGER BALL/
DOWNROD
ASSEMBLY
HANGER BALL
HANGER BRACKET
HANGER BALL
GROOVE
ANTI-ROTATION
TAB
ETL Model No.: CF590