Dovre 2000DV Installation Et Mode D'emploi page 53

•
Operating test: lighting the pilot flame, lighting the main burner, operation of
the remote control.
Access to the most important components
•
Hook off the decorative frame
•
Remove the glass door - 4 clips, 2 on top, 2 on bottom
•
Remove the cover plate underneath the combustion chamber (one screw, below
in the middle). The pilot flame is now visible for repair or maintenance.
•
Remove the ceramic logs and ashes.
•
The main burner can now be lifted from its seat and removed.
•
The main injector is visible on the bottom of the combustion chamber.
•
If requested, the complete gas unit can be removed from the fireplace. The gas
unit holder plate is fixed against the bottom plate of the combustion chamber by
means of a series of screws.
Notes
2000DV - 2080DV
54
03.27987.000