Beurer BC 54 Mode D'emploi page 37

A A is displayed.
The average value of all saved measured
values in this user memory is displayed.
• Press the memory button M1.
AM is displayed. AM
The average value of the morning meas-
urements for the last 7 days is displayed
(morning: 5.00 a.m. – 9.00 a.m.).
• Press the memory button M1.
PM is displayed. PM
The average value of the evening meas-
urements for the last 7 days is displayed
(evening: 6.00 p.m. – 8.00 p.m.).
• If you press the memory button M1
again, the last individual measurement
is displayed (in this example, measure-
ment 03).
• If you press the memory button M1 once more, you
can view your individual measured values.
• To switch the device off again, press the START/
STOP button
You can exit the menu at any time by pressing the
START/STOP button
• To erase a user's memory, first select the user mem-
ory to be erased by pressing the M1 or M2 memory
button on the off device and confirm your selection
by pressing the START/STOP button
• The average value of all measurements appears on
the display; in parallel, A A lights up.
• Press and hold down both memory buttons M1 and
M2 simultaneously for 5 seconds.
[L 00 appears on the display. All the val-
[L 00
ues in the selected user memory have
now been deleted.
37
.
.
.