Beurer BC 54 Mode D'emploi page 36

Please be aware that these standard values can only serve
as a general guideline, as the individual blood pressure
varies in different people and different age groups, etc.
Furthermore, it must be noted that measurements taken
yourself while at home are generally lower than those that
are taken by the doctor. For this reason, it is important
that you regularly consult your doctor for advice. Only
they are able to give you your personal target values for
controlled blood pressure – in particular if you receive
medicinal therapy.
Cardiac arrhythmia
This device can identify any cardiac rhythm disturbances
as part of the analysis of your recorded pulse signal dur-
ing blood pressure measurement. In this case, after the
measurement, the device will indicate any irregularities in
your pulse by displaying the
This can be an indicator for arrhythmia. Arrhythmia is an
illness in which the heart rhythm is abnormal because of
flaws in the bioelectrical system that regulates the heart-
beat. The symptoms (skipped or premature heart beats,
pulse being slow or too fast) can be caused by factors
such as heart disease, age, physical disposition, excess
alcohol and tobacco, stress or lack of sleep. If the
symbol appears on the display after the measurement,
the measurement must be repeated as the measurement
accuracy may be impaired. To assess your blood pres-
symbol in the display.
36
sure, only use the results that have been recorded without
corresponding irregularities in your pulse. If the
bol appears frequently, please consult your doctor. Only
they can establish the existence of an arrhythmia during a
checkup, using their means of diagnosis.
Saving, displaying and deleting measured values
The results of every successful measurement are
stored together with the date and time. The oldest
measurement is overwritten in the event of more than
60 measurements.
• To select the corresponding user memory, press
the M1 memory button (for user ) or M2 (for user
) on the switched-off device. Confirm your selec-
tion by pressing the START/STOP button
• If Bluetooth ® is activated (the
the display), the blood pressure monitor attempts to
connect to the app. The buttons are deactivated and
the symbol ceases to flash as soon as a connec-
tion is established and the data is transferred.
If you press the memory button M1 or M2
in the meantime, the transfer is cancelled.
The symbol is no longer shown.
sym-
.
symbol flashes on