Beurer BC 54 Mode D'emploi page 31

There are two different ways to access the menu
from which you can adjust the settings:
• Before initial use and after each time you replace
the battery:
When inserting batteries into the device, you will
be taken to the relevant menu automatically.
• If the batteries have already been inserted:
Press and hold the START/STOP button
device when switched off for approx. 5 seconds.
In this menu you can adjust the following settings in suc-
cession:
Hour
Date
➔
format
It is essential to set the date and time. Otherwise, you will
not be able to save your measured values correctly with a
date and time and access them again later.
The hour format now flashes on the
display.
• Select the desired hour format us-
ing the memory button M1 or M2
and confirm with the START/STOP
button .
Time ➔ Bluetooth
➔
The year flashes on the display.
• Select the desired year using the
memory button M1 or M2 and con-
firm with the START/STOP button
.
The month flashes on the display.
• Select the desired month using the
on the
memory button M1 or M2 and con-
firm with the START/STOP button
.
The day flashes on the display.
• Select the desired day using the
memory button M1 or M2 and con-
®
firm with the START/STOP button
.
If the hour format is set as
display sequence is reversed.
31
, the day/month