Virutex EB140 Mode D'emploi page 105

A
(Figure 37)
(Figure 38)
A
F
(Figure 39)
12 - Next, scraper group A (Fig. 37) removes any glue remai-
ning on the top or bottom of the board.
13 - When the rear part of the board releases the lever for
B valve C (Fig. 38), blade B (Fig. 38) cuts the entering edge.
C
14 - When the rear part of the board releases the lever for
valve F (Fig. 39), blade A (Fig. 38) moves in the direction of
the board and cuts the excess rear edge.
15 - The board continues advancing until the profiling and
scraping are finished.
16 - Collect the board when it has completely emerged from
the feeder and has come to a stop.
EB140 / Operating instructions - 105