Technical Data - Specifications - Nice UDL2 Instructions Et Avertissements Pour L'installation Et L'utilisation

page de 104

/ 104
Matières
Table des Matières
Signets

Table des Matières

Les langues disponibles

WARNINGS

• All of the technical characteristics indicated refer to a temperature of 20°C (± 5°C).

• The company reserves the right to introduce all modifications to the product it deems necessary at any time, however keeping the functions and intended

use unaltered.

DESCRIPTION

Power supply:

CAUTION:

On site fuse:

Internal fuse:

Terminals:

Hydraulic motor connection:

Standby power:

Ambient temperature:

Protection class:

Dimensions:

CE Declaration of Conformity and declaration of incorporation of partly completed machinery

Declaration in accordance with the following Directives: 2004/108/EC (EMC); 2006/42/EC (MD) Annex II, No. 1, part A

Note – The content of this declaration corresponds to that specified in the official document deposited at the Nice S.p.A. headquar-

ters and, in particular, to the latest revised edition available prior to the publishing of this manual. The text herein has been re-edited for

editorial purposes. A copy of the original declaration can be requested from Nice S.p.A. (TV) I.

Declaration number: 444/UDL2

Manufacturer's Name: NICE s.p.a.

Address: Via Pezza Alta N°13, 31046 Rustignè di Oderzo (TV) Italy

Person authorized to compile the technical documentation: NICE s.p.a.

Type of product: Safety/control unit for loading ramps, 2006/42/EC - Annex IV

Model / Type: UDL2 Series LR01

Accessories: -

The undersigned, Mauro Sordini, as Chief Executive Officer, hereby declares under his own responsibility that the product identified

above complies with the provisions of the following directives:

• DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation

of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC, in accordance with

following harmonised standards: EN 61000-6-2:2005, EN 61000-6-4:202007 + A1:2011

In addition, the product conforms to the following directive in accordance with the provisions applicable to partly completed machinery:

Directive 2006/42/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of May 17 2006 regarding machines and amending directive

95/16/EC (consolidated text)

- The manufacturer undertakes to transmit, in response to a reasoned request by the national authorities, relevant information on the

partly completed machinery. This shall be without prejudice to the intellectual property rights of the manufacturer of the partly com-

pleted machinery.

- Should the partly completed machinery be put into service in a European country with an official language different to the one used

in this declaration, a translation into that language must be provided by the person bringing the machinery into the language area in

question.

- The partly completed machinery must not be put into service until the final machinery into which it is to be incorporated has been

declared in conformity with the provisions of Directive 2006/42/EC, where appropriate.

The product also complies with the following standards:

EN 60335-1:2012; EN 60335-2-103:2003 + A11:2009; EN 60204-1:2007; EN ISO 13849-1:2008 + AC:2009

The parts of the product which are subject to the following standards comply with them:

EN 13241-1:2003 + A1:2011, EN 12445:2000, EN 12453:2000, EN 12978:2003

EC-Type examination Certification No. 44 205 14 00 1001 - NB 0044

TÜV NORD CERT GmbH, Langemarckstraße 20, 45141 Essen - GERMANY

Oderzo, 22 July 2014

14 – English