Fittings; Security Lock 309 With Escape Door; Security Lock 309 Without Escape Door; Lock Cylinders - Assa Abloy effeff 309 Notice D'installation Et De Montage

Pic. 7 :
Fittings and door handles
Pic. 8 :
Key withdrawal position
EN
44

Fittings

Outside
Disengaged side
A
LA
2
XF
LA
A

Lock cylinders

max.
30°
Security lock 309 with escape door function
The security lock 309 with escape door function requires
a fitting
The length of the handle pins depends on the
Panic side
The inner and outer door handle pin are different and
I
usually identified by engraved letters. The screw-on
LI
part of the handle pin must be mounted on the inside.
Security lock 309 without escape door function
The security lock 309 without escape door function with
door handles which can engage and disengage on
both sides requires a continuous, non-split handle
pin.
XP
LI
I
The length of the lock cylinder to be installed is
determined from the door leaf thickness and the door
escutcheon thicknesses (fittings) inside and out.
The key withdrawal position (Pic. 8) of the locking
lever may not exceed 30 ° to the bottom left and
right.
max.
30°
· with split handle pin
· and door handles rotatable on both sides sup-
ported in the escutcheons in accordance with
DIN EN 179.
· door leaf thickness,
· the horizontal lock position
· and the required depth of engagement in the
door handle (Pic. 7).
Installation