Fittings; Electric Security Lock 809 With Escape Door Function; Electric Security Lock 809 Without; Lock Cylinders - Assa Abloy effeff 809-12 Notice D'installation Et De Montage

Pic. 9 :
Escutcheons and
door handles
Pic. 10 :
Key withdrawal position
Installation

Fittings

Outside
Free wheel side
A
LA
2
XF
LA
A

Lock cylinders

max.
30°
Panic side
I
LI
XP
LI
I
The length of the profile cylinder to be used arises
from the door leaf thickness and the door escutcheon
thicknesses (fittings) on the inside and outside.
The key withdrawal position (Pic. 10) of the locking
lever may not exceed 30° at the bottom on the left or
right.
max.
30°
Electric security lock 809 with escape door
function
The electric security lock 809 requires a panic
fitting
· with split handle pin
· and door handles with bearing in the escutch-
eons, turning in both directions according to
DIN EN 179.
The length of the handle pins depends on
· the door leaf thickness,
· the horizontal lock position and
· the depth of engagement in the door handle
(Pic. 9).
The inner and outer handle pins are different and
are usually identified by stamped letters. The
screw-on part of the handle pin must be mounted
on the inside.
Electric security lock 809 without escape door
function
The electric security lock 809 without escape door
function with door handles which can engage and
disengage on both sides requires a continuous,
non-split handle pin.
EN
53