Terminating The Charging Process; Maintenance And Care; Activities - Mennekes Cable de charge en mode 2 avec IC-CPD pour la charge de vehicules electriques Mode D'emploi

5.5 Terminating the Charging Process

)
Terminate the charging process from the vehicle (e. g.
using the key-based remote control or the STOP button
in the vehicle).
)
Disconnect the charging connector from the electric
vehicle.
)
Pull the plug (e.g. SCHUKO
socket.
, CEE) out of the wall
®

6. Maintenance and Care

6.1 Activities

DANGER!
Danger of death due to damaged charging cable!
)
Check the charging cable for external damage prior to
every use.
)
Never connect a vehicle and a socket with a defective
charging cable.
)
Do not use a charging cable if it is damaged.
The charging cable must be visually checked for external
damage at regular intervals.
The components have to remain disconnected as long as
they are being checked.
Cable
)
Check the cable for soiling and external damage.
)
Clean the cable whenever necessary, using a dry cloth.
)
If the charging cable is found to be damaged (e.g. cuts
or cracks on the sheathing are spotted), discontinue
using the cable.
Housing
)
Perform a visual inspection for defects.
)
Check that the LED indicator panel is functional.
)
Clean the enclosure as needed using a slightly damp
cloth.
Charging Connector
)
Check the charging connector for damage and dirt.
)
Clean the charging connector as needed using a slightly
damp cloth.
Infrastructure plug
)
Check the infrastructure plug (e.g. SCHUKO
CEE plug...) for damage and dirt.
DE
EN
NL
FR
IT
ES
CZ
® plug,
29