Repair; Status Display / Error Messages - Mennekes Cable de charge en mode 2 avec IC-CPD pour la charge de vehicules electriques Mode D'emploi

Wall socket
)
During the charging process, the thermal stress on the
wall socket is very high. If a socket becomes discolored
or it is disproportionately difficult or easy to insert or
remove a plug, it must be checked by a qualified special-
ist and replaced if necessary.
WARNING!
Risk of loss of life if handled incorrectly!
If the enclosure, charging cable, charging connector, plug
or socket displays visible damage, the charging cable must
be removed from use immediately. If a damaged device
continues to be used, there is a risk of electric shock or
cable fire.
)
Never connect a defective charging cable with a
vehicle or socket!
30

6.2 Repair

NOTICE
Risk of destruction as a result of incorrect handling!
Only the manufacturer can repair the charging cable or
replace components (plug, connector or in-cable module).
Opening the device will destroy it and void the warranty.
If the device is visibly damaged, it must be checked by a
qualified specialist and replaced if necessary.
)
If the device is to be repaired, please contact the
manufacturer.

6.3 Status Display / Error Messages

Display on IC-CPD
Status House Power
A* Green Green
B* Green Green
C* Green Green
D* Off Off
E* Off Off
Fault in Red Off
home ins-
tallation
(miswired)
RCD trig- Off Off
gered
Car Remarks
Off No vehicle
connected
Green Vehicle
connected
Green Vehicle can be
charged
Red Vehicle with
after gassing lead
three batteries
seconds
Red Short circuit
between CP
and PE
Off No PE (ground
conductor)
present
or fault in
the home
installation
Flashing There is
red current
leakage