Service - Mennekes Cable de charge en mode 2 avec IC-CPD pour la charge de vehicules electriques Mode D'emploi

Recommendation:
Fit a fire alarm near the socket!
)
Always observe the warnings in the operating manual of
your electric vehicle.
)
In addition to this operating manual, the electric vehicle
documentation must also be complied with.
)
Avoid kinking the charging cable.
)
Ensure that a vehicle does not drive over the charging
cable, especially the plug and socket.
NOTICE
Risk of material damage due to incorrect contact!
When inserting the charging plug in a wall socket, avoid
exerting a mechanical load on the socket. Incorrect
contact can result in damage due to heat at the wall
socket.
„ At temperatures below -32 °C, the charging cable will
not activate. The five LEDs on the charging current
display remain red.
Keep the device in a place with a higher ambient
temperature prior to the charging process.

2.3 Service

The device was in perfect working order at the time it left
the factory.
In the event of complaints regarding the charging cable,
please contact MENNEKES.
➡
"1. General information"
Please have the following information on your charging
cable (see name plate) ready at hand:
„ type designation / serial number;
„ manufacturing code;
Please also provide the following details:
„ reason for complaint;
„ duration of use;
„ ambient conditions (temperature, humidity).
DE
EN
NL
FR
IT
ES
CZ
21