Maintenance Schedule - Etesia MBHE Notice D'instructions

8. Maintenance schedule

Page Component
10 hours
33 Engine oil
38 Air filter
39 Cooling system
37 Spark plug
41 Battery
Controls
39 Petrol filter
and hose
43 Blade
43 Blade coupling
Electromagnetic
clutch
41 Belts
39 Transmission
Brake
Steering
21 Electric circuit
45 Grass box
42 Wheels

Always before mowing
Check level and top up
if necessary
Remove grass
from engine grille
Check for good
working order
Check condition and tightness.
Sharpen or replace
if necessary
Ensure pedals in
good working order.
Check oil level in hydrostatic
transmission box and
ensure cooling not impeded
by grass or dust deposits
Check efficiency of
parking brake
Check safety switches
Clean
Check tyre pressure
After the first Every 50 hours
Drain
Clean
Check level and
top up if necessary
Recommended
service
Check and lubricate
the blade shaft
by your dealer Drain the oil after
the 50 first hours.
Check the shaft screw clamping Drain the gear box oil every
of the transmission box input
pulley. Replace the pulley every
300 hours in professionnal use.
Check steering joints.
Lubricate pinion, ring gear
and pivot pin of axle.
Play adjusting.
Control play between column and
steering ring and adjust it when
necessary.
Check seams
Every 100 hours or yearly
Replace
Check and clean
Clean and adjust
or replace
Lubricate pivot pins
on cutting height adjustment
and box discharge levers
Replace filter, check hoses
Check brake pads for wear
Check tension
and for wear
Check and adjust system.
Lubricate pedal pins.
200 hours.
Lubricate front and rear
wheel axles