Technical Specifications - Beurer BC 28 Mode D'emploi

Battery disposal
• Empty, completely flat batteries must be disposed of
through specially designated collection boxes, recy-
cling points or electronics retailers. You are legally
required to dispose of the batteries.
• The codes below are printed on batteries
containing harmful substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury.

11. Technical specifications

Model no. BC 28
Measurement Oscillometric, non-invasive blood
method pressure measurement on the
wrist
Measurement range Cuff pressure 0 – 300 mmHg,
systolic 60 – 260 mmHg,
diastolic 40 – 199 mmHg,
pulse 40 – 180 beats/minute
Display accuracy Systolic ± 3 mmHg,
diastolic ± 3 mmHg,
pulse ± 5% of the value shown
Measurement
uncertainty
Memory
Dimensions
Weight
Cuff size
Permissible operating
conditions
Permissible storage
conditions
Power supply
Battery life
Classification
The serial number is located on the device or in the bat-
tery compartment.
35
Max. permissible standard
deviation according to clinical
testing:
systolic 8 mmHg /
diastolic 8 mmHg
2 x 60 memory spaces
L 84 mm x W 60 mm x H 29 mm
Approx. 92 g
(without batteries, with cuff)
140 to 195 mm
+ 10°C to +40°C, ≤85% relative
humidity (non-condensing)
-20°C to +50°C, ≤ 85% relative
humidity, 800 –1050 hPa ambient
pressure
2 x 1.5-V AAA batteries
For approx. 170 measurements,
depending on levels of blood
pressure and inflation pressure
Internal supply, IP22, no AP
or APG, continuous operation,
application part type BF