Beurer BC 28 Mode D'emploi page 28

• Before initial use and after each time you replace the
battery:
When inserting the batteries into the device you will be
taken to the relevant menu automatically.
• If the batteries have already been inserted:
With the device switched off press and hold the
START/STOP button
In this menu you can adjust the following settings in suc-
cession:
Hour format
Hour format
• Press and hold the START/STOP button
for 5 seconds or insert the batteries. The full
display appears.
• Select the desired hour format using the
memory button M and confirm with the
START/STOP button
for approx. 5 seconds.
Date Time
➔ ➔
.
Date
The year flashes on the display.
• Select the desired year using the
memory button M and confirm with
the START/STOP button
The month flashes on the display.
• Select the desired month with the mem-
ory button M and confirm with the START/
STOP button .
The day flashes on the display.
• Select the desired day using the memory but-
ton M and confirm with the START/STOP but-
ton .
If the hour format is set as 12h, the day/month dis-
play sequence is reversed.
Time
The hours flash on the display.
• Select the desired hour using the memory
button M and confirm with the START/
STOP button .
The minutes flash on the display.
• Select the desired minute using the mem-
ory button M and confirm with the START/
STOP button .
Once all the data has been set, the device switches off
automatically.
28
.