Table Des Matières - caprari PM50 Notice D'utilisation Et D'entretien

PM
If the pump is supplied by Caprari without driving machine:
- comply with the specifications given in the "Motor table" in chapter 10 "Technical data" if an electric motor
is used;
GB
- comply with the assembly specifications given in paragraph 5.3 "Mechanical connections";
- it is forbidden to start a machine assembled in this way unless it has been first declared as conforming to
the provisions established by the pertinent Directives.
INDEX
Operative data
1 - General information
2 - Safety
3 - Description of the product and use
4 - Storage and handling
5 - Assembly and installation
6 - Use and management
7 - Disposal and dismantling
8 - Warranty
9 - Troubleshooting
10 - Technical data
11 - Dimensions and weights
12 - Nomenclatures and typical sections
Declaration of conformity (removable)
Caprari, dealer and/or after-sales service reference
1. GENERAL INFORMATION
1.1. Use of symbols
The instructions in this manual concerning safety are marked by this symbol.
Failure to comply with these instructions could expose personnel to health risks.
The instructions in this manual concerning electrical hazards are marked by this symbol.
Failure to comply with these instructions could expose personnel to risks of an electrical nature.
ATTENTION
Instructions preceded by this word concern the main recommendations for correct installation, operation, preservation
and disposal of the product itself.
To ensure safe and reliable management of the electric pump throughout its working life it is, however, essential to
comply with all the instructions in this manual.
Read the Use and Maintenance manual.
Take care to avoid rotating parts.
1 2
ENGLISH
GB
page 12
page 12
page 14
page 14
page 15
page 15
page 18
page 20
page 20
page 20
page 52
page 55
page 73
Caprari S.p.A.