Step 4. Connect The Usb Cable - HP Scanjet N6010 Guide D'installation

Step 4. Connect the USB cable

Caution
computer with the USB cable. See Step 2. Install the software on page 5.
Use the USB cable that came with the scanner to connect the scanner to the computer.
1. Connect the square end of the cable to the scanner.
2. Connect the rectangular end of the cable to the computer.
Note
use the USB port that is in the back.
Setup and Support Guide
Be sure to install the software before connecting the scanner to your
If there is a USB port on both the front and the back of the computer,
7