Connect The Scanner To A Network - HP Designjet T11 MFP Série Guide De Référence Rapide

6. Press the Login and Password buttons to enter strings and apply them.
NOTE:
name.
7. Restart the system to apply new login/password protection.
TIP: Press the Reset button to remove login/password protection for FTP/
WebDAV access.

Connect the scanner to a network

To make your system recognizable to others on the network, follow these steps.
NOTE: If an administrator password has been set, you are required to enter it
before you can configure the network settings.
1. Connect the RJ45 network cable to the Ethernet port at the back of your touch
screen.
2. Check your network settings:
a. Press the Setup tab.
b. Press the Options button.
c. Press the System button.
d. Press the Advanced button.
e. Enter the administrator password if prompted by the system.
The string "@scanner" is always appended to the entered login
Connect the scanner to a network 39