Preview Copies; Zoom All; Zoom In; Zoom Out - HP Designjet T11 MFP Série Guide De Référence Rapide

7. Print test scans and adjust the camera values until you are satisfied with the
results.
8. Click OK to save your settings.
To return the insertion slot height to its normal position:
1. Remove all material from the insertion slot.
2. Press the Automatic Thickness Adjustment Control key.
3. Press and hold the arrow-down key until the insertion slot has stopped
adjusting.
Try to avoid leaving the insertion slot set above the minimum height for long periods
of time. The insertion slot must be at its minimum height for the scanner to perform
the automatic self-adjustment procedure.

Preview copies

The preview feature allows you to make various adjustment to the document size,
margins, and paper frame. The document size is determined by the size settings
made in the Copy tab. The size and thickness of the paper frame in the preview
window is determined by the Input Size, Output Size, and Margins settings.
Press the Preview button

Zoom all

Use this feature to resize the preview image such that it fits exactly within the
preview window.

Zoom in

Use this feature to zoom in on the preview image. The zoom in axis is in the center
of the preview window. Continue pressing the Zoom In button to the required level
of detail.

Zoom out

to preview a document.
Preview copies 31