HP Designjet T11 MFP Série Guide De Référence Rapide page 15

4. Press the OK button.
5. Press the Quality button.
6. Define the scan quality and print-quality settings using the Quality dialog box.
●
Scan quality: Select one of the following scan quality settings:
◦
Scan resolution: Manually set the scan resolution in dots per inch
(dpi).
◦
Auto: The system determines the best scan resolution based on the
print quality (Fast, Normal, or Best) that you select. The resolution
setting (in dpi) is displayed next to the Auto checkbox (200 dpi in
the example above).
◦
Descreen: The scanner scans with the optical resolution and relays
the data to the system. The software then sets the optimal resolution
value.
NOTE:
scanning raster images (non-vector images, such as .jpeg, .tiff,
and .pdf files), however the scanning speed is reduced.
◦
Turbo: The Turbo setting increases the rate at which the paper is
fed and reduces the amount of scanning data that is captured, which
means the scanning speed increases, but the image quality
decreases. To use the Turbo setting, first manually set the scan
resolution, and then select Turbo.
The Descreen setting gives the best results when
Set the output quality 11