Print A File - HP Designjet T11 MFP Série Guide De Référence Rapide

4. Press the Scan tab.
5. Press the Settings button, select Batch Scan, and then press the OK button.
6.
Press the Scan-to-file button
documents. Each document is scanned and saved as a file.
TIP: If you want to interrupt the batch-scan mode, press the Stop button
. Doing so temporarily stops the batch-scan mode, allowing you to scan
a single document with different settings. The batch-scan mode is resumed after
you have scanned the single document.
TIP: You can configure the scanner to eject each original document upon copy
completion so that the next original can be fed. To select this option, go to the
Setup tab and select Options > Scanning > Eject paper.
The scanner remains in batch-scan mode until you cancel it by pressing the
Settings button in the Scan tab, and then deselecting the Batch Scan option.

Print a file

You manage the files that you want to print in the Print tab. You can define the
number of copies you want of an individual file, and how many sets of the complete
list you want copied.
1. If you do not already have a media profile for the paper type you are planning
to use, you must create one. See
26 Chapter 2 Basic Operations
, and then begin feeding your original
Create a new media profile on page 6.