Set Sleep And Wake-Up Timers - HP Designjet T11 MFP Série Guide De Référence Rapide

Set sleep and wake-up timers

Because setting the sleep and wake-up timers ensures that the scanner will shut
down automatically when not in use, it is the best way to maximize the useful life
of the lamp.
1. Press the Setup tab.
2. Press the Options button.
3. Press the System button.
4. Press the WIDEsystem button, and then select the Timer tab.
●
To activate automatic power-on, select the check box for the day in the
On column.
To modify the time, select the hours digits and press the up or down
buttons and then select the minutes digits and repeat the process.
Select AM or PM, and press the up or down buttons.
●
To activate automatic power off, select the check box for the day in the
Off column, then set the time as described above.
5. Press the Apply button to confirm your changes and continue, or press the
OK button to confirm changes and exit WIDEsystem.
46 Chapter 2 Basic Operations