Dhollandia DH-CH100 Série Manuel De L'utilisateur page 83

Table des Matières

Publicité

Legend
W52 = Weekly check (by owner / fleet operator)
M3 = 4-monthly check = 3x / year (by a qualified DHOLLANDIA service agent)
J1 = Yearly winter maintenance (by a qualified DHOLLANDIA service agent)
§2.1 - High pressure cleaning
Platform
Cassette
§2.2 - Greasing
All articulation points with grease nipples
Mechanical platform lock, mechanism of the cover
О Correct and complete greasing
§2.3 - Documents & reports
О CE Declaration of Conformity
О Fitting Declaration (by the installer)
О User's manual in the correct language
О Maintenance & Repair Reports
О Inspection Reports
§2.4 - Identification, marking & safety decals
Identification sticker + serial number
Pictograms on the various control units
Decal with user's pictograms near the control box
Other originally applied safety decals & signs
DHOLLANDIA
Annex to section 2 ● DH-CH100 series...: CHECKLIST FOR MAINTENANCE & INSPECTION
STE = Statutory Thorough Examination (UK), or Periodic inspection by expert / competent person
To be verified during maintenance AND periodic inspection STE
О Additional points, only to be verified during periodic inspection STE
What to verify? Execute, service or repair if required !!
Clean the platform thoroughly to remove any dirt and grease from the working surface, and to
make the steel structure and welding seams clearly visible for inspection.
Verify if the inside of the cassette is free of dirt and debris, clean it out with compressed air pis-
tol if required.
What to verify? Execute, service or repair if required !!
Grease / lubrify thoroughly, according to the grease / lubrication plans in this manual
Verify correct and complete greasing according to the points above
What to verify? Execute, service or repair if required !!
Presence in the driver's cabin
Readability
Completeness, reports duly filled out after each intervention
What to verify? Execute, service or repair if required !!
Readability
completeness
Fixation & adhesion to the surface
EN
B22
Freq.
M3 J1
J1
Freq.
M3 J1
STE
Freq.
STE
Freq.
W52
M3 J1
STE

Publicité

Table des Matières
loading

Table des Matières