Table des Matières
Publicité
EN
N°
Description
...
...
6
Outer side skirts, preventing finger traps for acci-
dental bystanders on the sides of the platform, be-
tween the different elements of the lift arms.
7
Hydraulic cylinder + safety valve, keeping the auto-
matic roll-stop [See 4.2] locked in firm position until the
platform reaches the ground.
8
Straightforward and simple 2-button wander lead with
spiral cable, controlling all lift functions (slide-out, lift,
lower, slide-in).
9
Lever + switch system setting the correct height for
sliding in / out.
When starting the use: when sliding out, the platform
automatically starts to go up when the work position is
reached.
When ending the use: when lowering the platform from
any height above the cassette, the platform automati-
cally slides in into storage position when the correct
height is reached. (Condition: side gates and bridge
plate folded in storage position).
10
Mechanical platform lock. In storage position, the lift
frame and platform are blocked in fixed position by the
electric motor. The lock provides additional mechanical
security, preventing the platform from unintentionally
sliding out when driving.
11
Electric emergency stop
. Allows to switch-off
]
[
the electric power to the control unit, and to cause an
immediate stop of all electrically actuated lift move-
ments.
DHOLLANDIA
8
4.4
12
4.7
A25
4.5
4.6
11
10
12
4.8
9
13
4.9
Publicité
Table des Matières
