EN
6) OPERATION OF THE LIFT
§6.1 - Introduction
The DH-CH100... series are operated by a 2-button wan-
•
der lead with spiral cable for the functions SLIDE OUT/
LIFT / LOWER / SLIDE IN. [See Fig. 6.1]
The changeover from "SLIDE OUT" to "LIFT", and from
•
"LOWER" to "SLIDE IN" is controlled by a switch system
mounted on the lift arms [see Fig.9 on pg 25].
The lifts should be used by means of the original control
•
unit only. The following symbols are being used:
LIFT
LOWER
•
The DH-CH100... series are operated in simi-
lar way, but specific components might differ
on the various lift types. In case of doubt,
contact your national DHOLLANDIA dealer
prior to continuing.
DHOLLANDIA
6.1
SLIDE
OUT
SLIDE
IN
A49