EN
Fig.
Closing up in travel position
...
...
6.2.k
Use the controls to "LIFT" the platform min. 15cm
6.2.l
above the level of the cassette. Don't slide the plat-
form in below this level
6.2.m Fold the side safety rails back onto the platform sur-
face.
6.2.n
Fold the bridge plate back on top of the safety rails.
6.2.o
Use the controls to "LOWER" the platform.
6.2.p
Continue to press the button "LOWER / SLIDE IN"
6.2.q
until the platform has reached its travel position, and
the platform lock on the side of the cassette is en-
gaged.
When doing so, the lift will automatically switch over
from "LOWER" to "SLIDE IN" at the correct height
required for the retraction movement.
6.2.r
Switch-off the electric power to the lift (switch in vehi-
cle cabin, and / or the main battery switch near the
power pack or control box of the lift).
DHOLLANDIA
6.2.k
6.2.m
6.2.o
6.2.r
A55
6.2.l
6.2.n
6.2.p
6.2.q