What Can Be Done If The Drive Shaft Of Your Appliance No Longer Rotates; What Can Be Done If Attachments Cannot Be Removed From The Shaft; What Can Be Done If Attachments Do Not Hold Tight On The Shaft - ESGE-Zauberstab M 100 D Design Notice D'utilisation

What can be done ...
... if the drive shaft of your appliance no longer rotates?
DE
GB
FR
NL
... if attachments cannot be removed from the shaft?
... if attachments do not hold tight on the shaft?
WARNING:
Replace damaged attachments immediately. No liability in case of damaged attachments!
42
When you have not used your appliance for a fairly long time the
drive shaft may get stuck due to small foodstuff residues which
have hardened and are now gumming up the lower shaft bearing.
Place your ESGE-Zauberstab
water and a mild detergent, then switch it on. In general your ESGE-
Zauberstab will then work again; if not, just try to free the shaft
®
carefully with pliers.
Should the shaft still not rotate, the fault probably lies elsewhere,
and the appliance should be sent to our repair service.
If sticky ingredients such as egg, sugar, honey are processed, it
is best to hold the appliance together with the attachment for a
minute or two in the washing-up water. Water will not harm the
housing, but the cable outlet must not get wet.
If an attachment no longer fits tightly on the stub, simply pinch
the spring blades of the attachment together with a pair of pliers.
Remove the accessories from time to time from the shaft and clean
the shaft. Otherwise the lower socket may be blocked because of
insufficient cleaning.
for about 5 minutes in a jug with hot
®