The Accessories; How To Use - ESGE-Zauberstab M 100 D Design Notice D'utilisation

The accessories

DE
GB
FR
NL

How to use ...

1
2
40
Attaching the accessories is very simple. Push the respective
attachment on to the drive stub of the mixer, so that the driver pin
(1) on the stub fits into the notch (2) of the attachment.
1
Centring for the attachment parts:
With centring to facilitate precise fitting of the attachments.
To remove the attachment, simply pull it off.
2
Caution:
Switch off and unplug appliance when changing accessories.
The attachments may be sharp.
Only use original ESGE-Zauberstab
For safety reasons the appliance is equipped with a press-button
switch, which means that the ESGE-Zauberstab
this switch is pressed down.
Switch on the appliance by pressing down the button only when the
cutter guard is in the receptacle. Switch off the appliance by relea-
sing the press-button once you have finished working. Then lift the
appliance out of the receptacle. Get rid of any pieces of food still ad-
hering to it by tapping the shaft a few times against your free hand.
Liquid ingredients
To achieve a better mixture, hold the ESGE-Zauberstab
angle in the receptacle (e.g. when blending soups).
Speeds
The ESGE-Zauberstab
Speed 2 is used for most applications, in particular for chopping
hard food or large quantities.
accessories.
®
offers two speeds.
®
works only when
®
at a slight
®