Ec Declaration Of Conformity - ASO Safety Solutions SK 41 Manuel D'utilisation

12. EC declaration of conformity

We hereby declare that the following products of type series:
SK 41-32
(part no. 203201, serial number format yymmnnnnn)
SK 41-32 RLU
(part no. 203202, serial number format yymmnnnnn)
SK 41-82
(part no. 203204, serial number format yymmnnnnn)
SK 41-82 RLU
(part no. 203203, serial number format yymmnnnnn)
Safety relay to be used in combination with safety edges, safety contact mats and
safety bumpers for preventing dangers at locations where there is a risk of crushing
and cutting satisfies the relevant essential health and safety requirements of the EC
directives and standards listed below on account of its design and construction, as
does the version brought to market by us:
EC - machinery directive 2006/42/EC
EN ISO 13849-1:2008
EN ISO 13849-2:2008
EN 61000-6-2:2005
EN 61000-6-3:2007
EC - type approval
Notified Body 0044
TÜV NORD CERT GmbH
Langemarckstraße 20
D-45141 Essen
EC type approval no.: 44 205 10 555564
This declaration of conformity does not relieve the designer/manufacturer of the
machine from his obligation to ensure that the conformity of the entire machine to
which this product is attached satisfies the corresponding EC directive.
Manufacturer and Authorised Signatory:
ASO, Antriebs- und Steuerungstechnik GmbH,
Am Grarock 8, D-33154 Salzkotten / Germany
Salzkotten, XX.XX.2010
Helmut Friedrich
(General Manager and Authorised Signatory)
21