Preparing For Measurement - Beurer BC 81 Mode D'emploi

5. Preparing for measurement

Inserting the batteries
• Remove
the battery
compart-
ment cover.
• Insert two
AAA size
batteries (included), ensuring correct polarity.
Do not use rechargeable batteries.
• Reattach the battery compartment cover.
If the low battery icon flashes and E6 appears,
replace the batteries.
After inserting the batteries, all LCD Display ele-
ments briefly appear and 12h flashes in the display.
Set the date and time as described below.
Remove the clear plastic sheet protecting the LCD
Display.
NOTICE:
• Never use different types of batteries, battery
brands or batteries with different capacities.
This may damage the unit. You should prefer-
ably use alkaline batteries.
• Never use rechargeable batteries. This may
damage the unit.
• Always replace all batteries at the same time
and use batteries of the same type.
• Replace weak batteries before they discharge
completely.
• When and
please change the batteries.
4
• Leaking batteries may damage the device. If
you do not intend to use the unit for longer
periods, remove the batteries from the bat-
tery compartment before placing the device
in storage.
Setting the hour format, date and time
This menu allows you to set the following func-
tions, one after another.
Hour format
➔
14
appears in the display,
Date Time
➔