Device Description; Preparing For Measurement - Beurer BM 50 Mode D'emploi

4. Device Description

2
1
1. Arm Cuff
2. Air Tube
3. Air Tube Connector
4. Start/Stop Button
5. Buttons
6. Risk Indicator
7. Air Tube Port
8. LCD Display
9. AC Power Adapter Jack
(AC Power Adapter Not Included)
10. Memory Button

5. Preparing for Measurement

Inserting/Replacing batteries
1. Remove the Battery Compartment Cover from the rear of the device.
2. Insert four "AA" alkaline batteries (included) according to the polarity
markings inside the compartment.
NOTE: Do not use rechargeable batteries.
3. All LCD elements will be briefly displayed.
NOTE: If audio output is on, the device will announce "The device is ready for
use. You may start measuring."
4. Reattach the Battery Compartment Cover.
5. Whenever batteries are inserted, the time and date will appear on the LCD
Display at all times.
3
8
7
6
5
4
Icons in the display:
12
9
11
10
9
10
7 6
1. Systolic Pressure
2. Diastolic Pressure
3. Pulse Rate
4. Pulse Symbol
5. Low Battery Icon
6. Number of Memory Space (average value
– total A, morning AM, evening PM)
7. Risk Indicator
8. Cuff Tightness Indicator
9. Release Air
10. Irregular Heartbeat Icon
11. User Number
12. Time and Date
8
1
2
3
5 4