Troubleshooting Guide; Specifications - Beurer BM 50 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

11. Troubleshooting Guide

In case of errors, " _" will appear in the LCD Display, where "_" is a number 1-6. Error messages may
appear if:
• No pulse rate detected ( )
• You speak or move during measurement ( )
• The cuff was not attached correctly or the cuff is fastened too tightly or loosely and measurement
takes longer than 25 seconds ( )
• A system or device error occurs ( )
• Air pressure is higher than 300 mmHg (
• Batteries are almost depleted ( )
In such cases, repeat the measurement. Do not move or speak. If necessary, replace the batteries.

12. Specifications

Type
Measurement Method
Measurement Range
Cuff Pressure
Systolic
Diastolic
Pulse
Display Accuracy
Pressure
Pulse
Dimensions
Weight
Cuff Size
Operating Range
Storage Range
Power Supply
Battery Life
The serial number is located on the device or in the battery compartment. These specifications are subject
to change without notice for purpose of improvement.
• This unit is in line with European Standard EN 60601-1-2 (In accordance with CISPR 11,
IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5,
IEC 61000-4-6, IEC 61000-4-8 and IEC 61000-4-11) and is subject to particular precautions with regard
to electromagnetic compatibility (EMC). Please note that portable and mobile HF communication
systems may interfere with this unit.
• This device is in line with the EU Medical Devices Directive 93/42/EEC, the "Medizinproduktegesetz"
(German Medical Devices Act) and the standards EN ISO 81060-1 (non-invasive sphygmomanometers,
Part 1: Requirements and test methods), EN 1060-3 (non-invasive sphygmomanometers, Part 3:
Supplementary requirements for electro-mechanical blood pressure measuring systems) and IEC
80601-2-30 (Medical electrical equipment – Part 2–30: Particular requirements for the safety and
essential performance of automated noninvasive blood pressure monitors).
)
BM 50
Oscillometric, non-invasive blood pressure measurement on the upper arm
0 – 300 mmHg
50 – 250 mmHg
30 – 200 mmHg
30 – 180 beats per minute
± 3 mmHg
± 5%
5.3 in L x 4.0 in W x 2.1 in H (134 mm L x 102 mm W x 53 mm H)
14.32 oz (406 g) with cuff, without batteries
8.7 – 16.5 in (22 – 42 cm)
41 – 104 °F (5 – +40 °C), 15 – 90% relative humidity (non-condensing)
-13 – 158 °F (-25 – +70 °C), ≤ 90% relative humidity
4 x 1.5V
AA batteries
Approx. 250 measurements, depending on the blood pressure level and/
or pump pressure
13

Publicité

Table des Matières
loading

Table des Matières