Beurer BC 81 Mode D'emploi page 26

Cuff size 5.3 in to 9.1in (13.5 cm to 23 cm)
(wrist circum-
ference)
Permissible +41 °F to +104 °F (+5 °C to +40
operating °C), 15-93 % relative humidity
conditions (non-condensing)
Permissible -13 °F to +158 °F (-25 °C to +70
storage °C), ≤ 93 % relative humidity,
conditions 700-1060 hPa ambient pressure
Power supply 2 x 1.5V
Battery life For approx. 300 measurements,
depending on levels of blood
pressure and pump pressure
Accessories Instructions for use, Quick start
guide, 2 x 1.5V AAA batteries,
storage box, blood pressure
passport
Classification Internal supply, IPX0, no AP
or APG, continuous operation,
application part type BF
These specifications are subject to change without
notice for purpose of improvement.
AAA batteries
26
The serial number can be found on the unit itself or
inthe battery compartment
• The accuracy of this wrist blood pressure monitor
has been carefully checked and developed with
regard to a long useful life. Precise instructions
for checking accuracy may be requested from
customer service.
• This unit is in line with European Standard
EN 60601-1-2 (In accordance with CISPR 11, IEC
61000-4-2, IEC 61000-4-3, IEC 61000-4-8) and
is subject to particular precautions with regard
to electromagnetic compatibility (EMC). Please
note that portable and mobile HF communication
systems may interfere with this unit.
• This device corresponds to the EU Medical
Devices Directive 93/42/EEC, the German
Medical Devices Act (Medizinproduktgesetz)
and the standards ISO 81060-1 (non-invasive
sphygmomanometers, Part 1: General
requirements), EN 1060-3 (non-invasive
sphygmomanometers, Part 3: Supplementary
requirements for electro-mechanical blood
pressure measuring systems) and IEC 80601-
2-30 (Medical electrical equipment – Part 2-30: