Hh.footplate Adapter Bracket - Sunrise Medical Quickie IRIS Mode D'emploi

E NG LI S H
E NG LI S H
HH. FOOTPLATE ADAPTER BRACKET
The footplate adapter bracket(A) can be installed by the dealer. The main purpose of this part is to allow for
height adjustment while using front mount footplates on a quick release hanger. The plate can be reversed
which adds to it's range of adjustment.
1. Footplate Height Adjustment
a. Remove the hardware (B, C) and remove the footplate(D) and adapter plate assembly.
b. Move the footplate(D) and assembly up or down to the desired position, using the "Front mount hanger
setup" table, and (figure 32) as reference.
c. Re-insert and tighten the hardware (B, C) to a torque of (96in-lbs)
d. Repeat the process for the other hanger and footplate.
NOTE– In most cases you will want to make sure the footplates are adjusted so that the height is the same on
both sides
MK-100151 Rev. D
IX. DEALER SERVICE & ADJUSTMENT
34
ADAPTER
2" EXTENSION
4" EXTENSION