General Warnings; Weight Limits; Intended Use; Attendants And Caregivers - Sunrise Medical Quickie IRIS Mode D'emploi

Masquer les pouces Voir aussi pour Quickie IRIS:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

E NG LI S H
A. WEIGHT LIMITS
NEVER exceed the weight limit specified by Sunrise Medical. The weight
capacity provided by your manufacturer is for the combined weight of a
rider and items carried using on-board storage. If you do exceed the weight
limit, damage to your chair, a fall, tip-over or loss of control may occur and
cause severe injury to the rider or others.
Weight Capacities
Quickie IRIS
Quickie IRIS HD
Quickie IRIS with Z-Finity
Footrest - 165lbs/(75kg).
Zippie IRIS
Zippie IRIS with Z-Finity
Footrest
B. INTENDED USE
The Quickie and Zippie IRIS Series of wheelchair's intended use is to pro-
vide mobility to persons limited to a sitting position.
DO NOT use this device for purposes other than what is intended by the
manufacturer
1. The wheelchiar is not designed for weight training and is unsafe for
use as a seat while weight training. Weight training from the wheel-
chair substantially changes the stability of the chair and may cause
tipping.
2. DO NOT stand on the frame of the wheelchair.
3. NEVER allow someone to stand on your chair or use it as a step
ladder.
4. This chair is designed for a single rider only.
5. Unauthorized modifications and use of parts or accessories not sup-
plied or approved by Sunrise Medical may change the chair struc-
ture. This will void the warranty and may cause a safety hazard. If
the warning is ignored, damage to your chair, and the potential
severe injury of the person using the chair for unintended purposes
can occur.
C. ATTENDANTS AND CAREGIVERS
Before you assist a rider, be sure to read all warnings contained in this
manual, and follow all instructions that apply. Be aware that after consulting
a healthcare advisor, you will need to learn safe and proven body mechan-
ics to use and create assistive methods best suited to your abilities.
D. ACCESSORIES
Unauthorized modifications or use of parts, or accessories not supplied or
approved by Sunrise Medical may change the chair structure. This will void
the warranty and may cause a safety hazard.
Some problems that may occur, but are not limited to:
1. Incorrect Wheels and/or tires that put the rider at risk of a fall or
tip-over.
2. Adding a component to the frame, changing the structural integrity of
the chair.
3. Any modification or disassembly can potentially create an unsafe situ-
ation where rider and/or attendant are put at risk.
WARNING
- 300lbs/(136kg).
400lbs/(181kg).
-
- 225lbs/(102kg).
- 165lbs/(75kg).
WARNING
WARNING
WARNING
E. KNOW YOUR CHAIR
Every wheelchair is different. Take the time to learn the feel of this chair
before you begin riding. Start slowly, with easy, smooth strokes. If you are
used to a different chair, you may use too much force and tip over. If you
use too much force, damage to your chair, a fall, tip-over or loss of control
may occur and cause severe injury to the rider or others.
F. REDUCE THE RISK OF AN ACCIDENT
1. BEFORE riding, you should be trained in the safe use of this chair by
your health care advisor.
2. Practice bending, reaching and transfers until you know the limit of
your ability. Have someone help you until you know what can cause
a fall or tip-over and how to avoid doing so.
3. Be aware that you must develop your own methods for safe use
best suited to your level of function and ability.
4. NEVER try a new maneuver on your own until you are sure you
can do it safely.
5. Get to know the areas where you plan to use your chair. Look for
hazards and learn how to avoid them.
6. Sunrise recommends using anti-tip tubes in evey circumstance.
If you fail to heed these warnings, damage to your chair, a fall, tip-over or
loss of control may occur and cause severe injury to the rider or others.
G. SAFETY CHECKLIST
Before Each Use Of Your Chair:
1. Make sure the chair rolls easily and that all parts work smoothly.
Check for noise, vibration, or a change in ease of use. (They may
indicate low tire pressure, loose fasteners, or damage to your
chair).
2. Immediately repair any problem. Your authorized supplier can help
you find and correct the problem.
3. Check to see that both quick-release rear axles are locked. When
locked, the axle button will "pop out" fully. If not locked, the wheel
may come off and cause you to fall.
4. If your chair has anti-tip tubes, lock them in place.
If you fail to heed these warnings, damage to your chair, a fall, tip-over or
loss of control may occur and cause severe injury to the rider or others.
H. CHANGES & ADJUSTMENTS
1.
If you modify or adjust this chair, it may increase the risk of a tip-
over UNLESS you make other adjustments as well.
2.
Consult your authorized supplier BEFORE you modify or adjust
your chair.
3.
We recommend that you use anti-tip tubes until you adapt to the
change, and are sure you are not at risk to tip over.
4.
Unauthorized modifications by the end-user, dealer or any other
individual, including the use of parts not supplied or approved by
Sunrise may change the chair structure. This will void the
warranty and may cause a safety hazard.
If you fail to heed these warnings, damage to your chair, a fall, tip-over or
loss of control may occur and cause severe injury to the rider or others.
5
V. GENERAL WARNINGS
WARNING
WARNING
WARNING
WARNING
MK-100151 Rev. D

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Zippie iris

Table des Matières