Swing-Away Controller Bracket - Sunrise Medical QUICKIE Q700 M Sedeo Ergo Manuel D'utilisation

4.6 Swing-away controller bracket

The joystick is mounted with a mechanism that allows the
joystick to be locked in a forward or retracted position, and
can accommodate a mid-line mount so the joystick can be
located in the center of the wheelchair.
Swing-away, (Fig. 4.16).
• To Swing-away the joystick, push outward on the inside of
joystick.
• Push the joystick away from the front of the armrest until it
locks into the outside swing-away position.
• To return to forward position, push the back of the joystick,
forward until it locks into place.
• To Swing-away the joystick to the inside, push inward on the
outside of joystick.
• Push the joystick away from the front of the armrest until it
locks into the inside swing-away position.
• To return to forward position, push the back of the joystick,
forward until it locks into place.
Pre-setting depth of the controller, (Fig. 4.17)
1. Loosen (A).
2. Slide (B) into desired position.
3. Tighten (A).
There are 2 ways to pre-set the height of the controller.
Pre-setting height of the controller (1), (Fig. 4.18).
1. Loosen (A).
2. Slide (C) into desired position.
3. Tighten (A).
Pre-setting height of the controller (2) , (Fig. 4.19)
1. Loosen (D).
2. Slide (B) into desired position.
3. Tighten (D).
Sedeo Ergo Rev.1.0
C
D
Fig. 4.16
Fig. 4.17
A
Fig. 4.18
B
Fig. 4.19
13