3.1.4 - Sac armement étanche
1 - Procéder
à
armement (voir chapitre 2.6)
2 - Fermer le sac correctement
3 - Attacher le sac armement sur les 2
point de fixation au milieu du bateau,
côté bâbord, à côté du boîtier de la
batterie.
3.1.5 - Mise en place du moteur
1 - Installer le moteur en suivant la
procédure
documentation moteur.
04/2019
l'inventaire
du
décrite
dans
3.1.4 - Waterproof equipment bag
sac
1 - Proceed to the inventory of the
equipment bag (see chapter 2.6)
2 - Close the bag properly
3 - Attach the equipment bag to the 2
attachment points in the middle of
the boat on the port side, next to
the battery case.
3.1.5 - Fitting the engine
1 - Install the engine by following the
la
instructions in the engine user
manual.
RIBA 400
Page 38