Publicité
Reboot the RVT to initialize it with these parameters.
4.5.2
Ethernet configurations
This menu displays the actual RVT IP address, mask address and gateway IP address.
Depending on the DHCP status, the displayed data may be different.
The below screens give the result for the above Example 1 and 2:
Example 1: The below screen shows the actual IP address fixed with DHCP disabled.
Example 2: The below screen shows the actual settings resulting from the automatic IP
address resolution with DHCP enabled.
4.5.3
Screen configuration
This menu helps the user to adjust the touch screen XY coordinates and the backlight
brightness.
Power Factor Controller RVT ç Measurements and Settings 63
Publicité
