Publicité
5.4.1.4 Measurement
These are the different groups with their size, type and assigned group IDs:
Group ID
Description
0x1000
Voltages
0x1001
Line Currents
0x1002
Temperature
0x1003
Powers
0x1005
PFC Control Data
0x1006
Status information
5.4.1.5 Universal
These are the different groups with their size, type and assigned group IDs:
Group ID
Description
0x2001
Ethernet current settings
0x2081
LED control
5.5 Parameter List
The parameter list is organized in several group of parameter.
Each group of parameter is identified by a Group ID.
A few data specifies how and where the data is available or can be programmed.
Parameters settings values have a limited range. If a written value exceeds the minimum
and maximum allowable values, the written group of parameter will be omitted.
1/ Byte offset
2/ Description
3/ Units
4/ RVT
5/ RVT3P
6/ Data type
7/ Size in bytes
8/ Default value
9/ Min value
10/ Max value -
11/ Modb @
30 Data table ç RVT communication
Size (in bytes)
104
56
36
88
24
32
Size (in bytes)
20
1
-
Offset in bytes of the data into the Group of parameters
-
General description
-
Units depending of the type of data
-
Applicable for the RVT 6 or 12. Some data are not available
for the basic standard RVT
-
Applicable for the RVT 12 with 3 phase measurement. All
data are available into this full version of the RVT.
-
Format
-
Depending on the data type
-
Default value programmed as factory settings
-
Minimum level allowed by this data
Maximum level allowed by this data
-
Base Modbus address where the data is located while
accessing through Modbus protocol
Modbus Base Address
30500
30600
30700
30800
30900
31000
Modbus Base Address
32600
31100
Publicité
