Publicité
settings can only be done through the communication
settings can be done through the user interface or the communication
temperature alarm ( alarm relay is activated ) or warning ( fan/warning
relay is activated )
no temperature alarm nor warning ( alarm and fan/warning relays are
not activated )
warning level achieved ( the fan/warning relay is activated )
alarm activated ( alarm relay is activated )
no alarm activated ( alarm relay is not activated )
settings locked by hardware switch at the back of the controller
settings unlocked by hardware switch at the back of the controller
demand to switch ON step(s)
demand to switch OFF step(s)
no demand to switch steps
automatic mode ( steps are switched automatically according settings )
manual mode ( steps can be switched manually )
set mode ( settings can be done )
mode change
on line help
close window
Validation
next page
Except for the start screen, for all other RVT screens, each screen has three parts: title
bar at the top, status bar at the bottom, and the setting area in the middle of the screen.
Manual Power Factor Controller RVT ç Easy start 15
Publicité
