Publicité
4.2.4
Meter
This function offers the user a better view of three most interested measurements.
Click on the wanted item, and then click the "Select" button to insert values in the meter
screen.
An example is shown below for three important measurements.
4.2.5
Event logging
Description
The event logging function allows the user to log each significant measured item (see
list here below) since last clearance:
-
the maximum (or minimum) value
-
the duration above (or below) the threshold.
Once a threshold has been set (see example below), the RVT starts recording the
maximum (or minimum) value automatically as well as the total duration until it is reset.
32 Measurements and Settings ç Power Factor Controller RVT
Figure 22: three measurements displayed in meter
Publicité
