Publicité
Switch
ON and
OFF
buttons
Then, "Switch ON and OFF 1 step" buttons are enabled.
Click on these buttons to switch steps manually.
Note: The RVT12-3P model will enter a new screen asking which kind of step should be
(de)activated. Differences between these steps can be found in
4.3.1.1.
4.2.2
System values
The System Values menu displays all measured system values sorted by type as shown
in
Figure 18.
For Three Phase Model RVT12-3P, the system values for each phase are
included as well.
Figure 18: System values
28 Measurements and Settings ç Power Factor Controller RVT
Publicité
