Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5 – STARTUP GUIDE
Configuring the Ethernet port
The address for this port must be located in the same network as that of the Ethernet address of the PC ( In the example below, the sub-network address
is 135.11.110.8 and the sub-network mask is 255.255.255.252 ).
NOTE : With Windows 9x, the PC address is displayed by selecting (using the mouse right button) Properties of the Network Neighborhood icon, then
(using the mouse left button), Properties of the TCP/IP component ( TCP/IP -> "Network Board Name" ).
With Windows NT, the PC address is displayed by selecting (using the mouse right button) Properties of the Network Neighborhood icon,
then, (using the mouse left button), Properties of the TCP/IP component ( TCP/IP protocol).
!
Follow the instructions below to configure the equipment Ethernet port.
Installation and User Guide - N56717020104
Page A5-6
No reproduction or communication without the written consent of SAGEM SA
Choose menu 2
and validate by
pressing the
"ENTER" key on
the keyboard.
Publicité
Chapitres
Table des Matières
