Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Configuration parameters per functional blocks
LPT :
Lower order Path Termination
Plesiochronous access
Signal label (VC3) transmitted, expected and received (C2 Byte); "Label" :
- "Sent", "01H" (unspecified equipment) or "04H" (async 34/45M)
- "Expected", "01H" (unspecified equipment) or "04H" (async 34/45M)
- "Received". (hexadecimal value)
Signal label (VC12) transmitted, expected and received (V5 Byte) "Label" :
- "Sent",: "000b" no connection or "010b" (asynchronous)
if connection (not configurable by the operator)
- "Expected", possible value : "001b" equipped without specification or
"010b" (asynchronous)
- "Received".
SD threshold : configurable from 10
configurable from 10
"SD threshold"
Path Trace transmitted for VC3 (Byte J1)
- "Trace sent" for VC12 (1 byte)
Path Trace transmitted for VC12 (Byte J2)
-- "Trace sent" (1 byte)
ADRLAN Card
Signal label (VC3# i) transmitted, expected and received; "Label" :
- "Sent", not configurable
- "Expected", not configurable
- "Received".
Ethernet port configuration (exclusive choice)
"automatic" (or auto-negociation) with 4 non-exclusive possible
operation modes,
"Manual" : select only one operation mode among the four available
operation modes :
- 100Mbps Full Duplex
- 100Mbps Half Duplex
- 10Mbps Full Duplex
- 10Mbps Half Duplex
Flow control
- LAN towards VC3_# i
- VC3_# i towardsVC3_# j or LAN
Interface configuration
- LAN in service / no service
- Maximum route Age
- Path trace J1 transmitted :
"UNNAMED VC3" + CRC7 not configurable and not treated in reception
Table 2-4 – Configuration parameters (4/8)
No reproduction or communication without the written consent of SAGEM SA
-5
-9
to 10
for VC3
-5
-9
to 10
for VC12
Installation and User Guide - N56717020104
2 - OPERATION
Default
value
"04H"
"04H"
"010b"
-6
"10
"
"UNNAMED VC3"
+ CRC7
"0x00"
"A8H"
"A8H"
"Automatic"
All operation
modes
authorised
60 %
60 %
Service
300 s
"
UNNAMED VC3"
+ CRC7
Page A2-5
Publicité
Chapitres
Table des Matières
